INFORMATION
■
Close & lock (walk away) function operating conditions
This function can be operated when all of the following conditions are met:
●
An electronic key is not detected within the vehicle.
All of the doors other than the power back door are closed.
●
The brake pedal is not depressed.
●
●
The engine switch is off.
■
Hands free close & lock (walk away) function
This function can be operated when all of the following conditions are met:
●
The hands free close & lock function setting is on.
The Hands Free Power Back Door operating conditions are met.
●
●
An electronic key is not detected within the vehicle.
●
All of the doors other than the power back door are closed.
The brake pedal is not depressed.
●
●
The engine switch is off.
■
Situations in which the close & lock (walk away) function may not operate properly
In the following situations, the close & lock function may not operate properly:
If the
switch on the lower part of the power back door is pressed by a hand which
●
is holding an electronic key
If the
switch on the lower part of the power back door is pressed when the
●
electronic key is in a bag, etc. that is placed on the ground
If the
switch on the lower part of the power back door is pressed with the
●
electronic key not near the vehicle
Closing the back door and lock all of the doors
* :
If equipped
1-4. Entering/exiting the vehicle and loading luggage
*
operating conditions
1
75