Table of Contents
Advertisement
6-2. Using the safe driving support functions
Figure 2 When engine output restriction control operates
●
Figure 3 When engine output restriction control and brake control operates
●
INFORMATION
■
If the PKSB (Parking Support Brake) system has operated
If the vehicle is stopped due to operation of the PKSB (Parking Support Brake), the PKSB
(Parking Support Brake) will be disabled and the driving assist infomation indicator will
illuminate.
If the PKSB (Parking Support Brake) system operates unnecessarily, brake control can
be canceled by depressing the brake pedal or waiting approximately 2 seconds for
it to automatically be canceled. Then, the vehicle can be operated by depressing the
accelerator pedal.
■
Re-enabling the PKSB (Parking Support Brake) system
To re-enable the PKSB (Parking Support Brake) when it has been disabled due to
operation of the PKSB (Parking Support Brake), either enable the system again, or turn
the engine switch off and then back to ON.
Additionally, if any of the following conditions are met, the system will be re-enabled
automatically and the driving assist infomation indicator will turn off:
The P shift position is selected
●
The object is no longer detected in the traveling direction of the vehicle
●
●
The traveling direction of the vehicle changes
*1 :
Except when the Pedestrians Rear of the Vehicle operated.
430
Engine output
A
Braking force
B
Time
C
Engine output restriction control begins op-
D
erating (System determines that possibility
of collision with detected object is high)
Engine output
A
Braking force
B
Time
C
Engine output restriction control begins op-
D
erating (System determines that possibility
of collision with detected object is high)
Brake control begins operating (System de-
E
termines that possibility of collision with de-
tected object is extremely high)
*1
Advertisement
Table of Contents
