Table of Contents
Advertisement
2-1. Starting and stopping the engine
•
The shift lever is shifted from P. (When the engine is stopped by the Stop & Start
system when the shift lever is in P.)
•
The driver' s seat belt is unfastened.
The driver' s door is opened.
•
The Stop & Start cancel switch is pressed.
•
•
The steering wheel is operated.
•
The accelerator pedal is depressed.
The vehicle starts to roll on an incline.
•
When the engine is stopped by the Stop & Start system, the engine may restart
●
automatically in the following situations: (To enable the engine to be stopped by the
Stop & Start system again, drive the vehicle.)
•
When the brake pedal is pumped or strongly depressed.
•
When the air conditioning system is being used.
When a switch of the air conditioning system is operated (windshield defogger
•
switch, etc.).
If the battery charge becomes low.
•
■
When the hood is opened
●
If the hood is opened while the engine is stopped by the Stop & Start system, the
engine will stall and will not be able to be restarted by the automatic engine start
function. In this case, restart the engine using the normal engine starting procedure.
If the hood is closed after the engine is started with the hood open, the Stop & Start
●
system will not operate. Close the hood, turn the engine switch off, wait 30 seconds or
more, and then start the engine.
Related Links
Brake hold system(P. 243)
Opening the hood(P. 512)
Starting the engine(P. 144)
Defog the windshield(P. 221)
Customizable features(P. 703)
Disabling the Stop & Start system
When the air conditioning is in automatic mode and the engine is stopped by the
Stop & Start system, the fan may operate at a low speed in order to prevent the
temperature in the cabin from increasing or decreasing or may be stopped.
In the following situations, disable the Stop & Start system.
154
Advertisement
Table of Contents
