Table of Contents
Advertisement
Turning the PKSB (Parking Support Brake) system ON/OFF
The PKSB (Parking Support Brake) system can be changed between ON (ena-
bled) and OFF (disabled) on the center display.
1
Select
.
2
Select [Driving assist].
3
Select [Parking support brake] to change ON (enable)/OFF (disabled).
When the PKSB (Parking Support Brake) is disabled, the driving assist infomation
indicator illuminates.
When turned OFF (disabled), the PKSB (Parking Support Brake) will be disabled
and will not be enabled until the setting is changed to ON again in center display.
(The function will not be reenabled by operating the engine switch.)
PKSB (Parking Support Brake) function displays and buzzers
When the engine output restriction control or brake control operates, a buzzer
sounds and a message is displayed on the multi-information display, head-up
*
display
and center display to alert the driver.
Depending on the situation, output restriction control operates to either limit
acceleration or restrict output as much as possible.
■
Engine output restriction control is operating (acceleration restriction)
Acceleration greater than a certain amount is restricted by the system.
●
Multi-information display:"Object Detected Acceleration Reduced"
●
Head-up display
●
Center display: No warning displayed
●
Driving assist infomation indicator: Not illuminated
●
Buzzer: Does not sound
●
Engine output restriction control is operating (output restricted as much as
■
possible)
The system has determined that stronger-than-normal brake operation is neces-
●
sary.
Multi-information display and head-up display
●
Center display: "BRAKE!"
●
Driving assist infomation indicator: Not illuminated
●
* :
If equipped
*
:"Object Detected Acceleration Reduced"
6-2. Using the safe driving support functions
*
: "BRAKE!"
6
431
Advertisement
Table of Contents
