Table of Contents
Advertisement
The Parking Support Brake determines that a stronger-than-normal brake opera-
•
tion is necessary to avoid a collision.
Brake control
●
•
Engine output restriction control is operating.
•
The Parking Support Brake determines that an immediate brake operation is
necessary to avoid a collision.
■
The system will stop operating when
The function will stop operating if any of the following conditions are met:
Engine output restriction control
●
•
PKSB (Parking Support Brake) system is disabled.
•
The system determines that the collision has become avoidable with normal brake
operation.
•
The static object is no longer in the traveling direction of the vehicle or approxi-
mately 6 to 13 ft. (2 to 4 m) away from the vehicle.
●
Brake control
•
PKSB (Parking Support Brake) system is disabled.
Approximately 2 seconds have elapsed since the vehicle was stopped by brake
•
control.
The brake pedal is depressed after the vehicle is stopped by brake control.
•
The static object is no longer in the traveling direction of the vehicle or approxi-
•
mately 6 to 13 ft. (2 to 4 m) away from the vehicle.
■
Detection range
The detection range of the system differs from the detection range of the intuitive parking
assist.
Therefore, even if the intuitive parking assist detects a static object and provides a
warning, the PKSB (Parking Support Brake) system may not start operating.
■
Intuitive parking assist sensor buzzer
Regardless of whether the intuitive parking assist sensor buzzer is enabled or not, if the
PKSB (Parking Support Brake) system is enabled, the front or rear sensors detect an
object and brake control is performed, the intuitive parking assist buzzer buzzer will
sound to notify the driver of the approximate distance to the object.
■
Situations in which the system may not operate properly
→ P.408
6-2. Using the safe driving support functions
6
433
Advertisement
Table of Contents
