Removing Shipping Materials - Canon C75, C80, C70 User Manual

Removing Shipping Materials

Follow this procedure to remove the shipping materials. Keep them in case you need to
transport the unit in the future:
MultiPASS C75/FAX-B215C
1
Remove the shipping
tapes from the top of
the unit.
4
Remove the shipping
tape and protective
piece from the output
tray.
6
Open the operation panel partially
by gently pulling it towards you (it
only opens slightly). Then remove
the protective sheet from the ADF.
Close the operation panel by
pressing it down from the centre
until it locks into place.
The actual shipping materials may differ in shape, quantity, and position from the ones shown
n
above.
Chapter 2
2
Remove the protective
piece from the multi-
purpose tray.
5
Open the document tray (MultiPASS
model only), then remove the protective
sheet and shipping tapes.
7
Open the printer cover, then remove the
shipping tape from the side of the unit.
Close the printer cover and document tray.
3
Remove the shipping
tape and protective
piece from the bottom
of the unit.
Setting Up 2-3