Using Coded Speed Dialling
To use this feature, you must first register a number for coded speed dialling. (
Follow this procedure to send documents using coded speed dialling:
1
Open the document tray (MultiPASS models
only).
2
Adjust the document feed lever for the
document you are loading. (
3
Prepare the document and load it, face down,
in the ADF. (
p. 4-4)
• For colour sending, press Colour/B&W (Color/
B&W) to turn on its light. (
• To adjust the resolution and contrast,
7-5.
4
Press Coded Dial.
5
Use the numeric buttons to enter the two-digit
code assigned to the number you wish to fax.
• The number registered under that coded speed
dialling code is displayed.
• If you enter the wrong code, press Stop. Then
press Coded Dial and enter the correct code.
•
appears if no fax number is assigned
to the coded speed dialling code you entered.
6
Press Start (Start/Scan) to begin scanning
for sending, or wait a few seconds for the unit
to begin scanning automatically.
• If you prefer the unit never to scan a document
automatically after a few seconds, disable the
setting. (
• You can also use coded speed dialling to send a document to more than one destination at a
n
time. (
p. 7-14)
• To dial a telephone number registered for coded speed dialling, simply lift the handset, press
Coded Dial, and enter the two-digit code.
6-8
Speed Dialling
p. 4-2)
p. 7-3)
pp. 7-4,
p. 14-6)
p. 6-6)
Ex:
(Currently used memory)
(Standby to scan)
A
Ex:
A
Ex:
Chapter 6