Scanned Area Of A Document - Canon C75, C80, C70 User Manual

Problem Documents
• To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Curled or rolled paper
– Torn paper
• Remove all fasteners (staples, paper clips, etc.) before loading the document into the ADF.
• Make sure any glue, ink, or correction fluid on the document is completely dry before
loading it into the ADF.
• If you have a document that will not feed properly into the ADF, make a photocopy of the
document and load the copy instead.

Scanned Area of a Document

The shaded area in the illustration below shows the scanned area of a document. Make sure
your document's text and graphics are within this area.
Chapter 4
– Carbon paper or carbon-backed paper
– Coated paper
– Onion skin or thin paper
A4
Max. 4.5 mm
Max. 4.0 mm
Max. 4.0 mm
Colour Fax: Max. 6.0 mm
Max. 4.5 mm
Document Handling 4-3