Using One-Touch Speed Dialling - Canon C75, C80, C70 User Manual

Using One-Touch Speed Dialling

To use this feature, you must first register a number for one-touch speed dialling. (
Follow this procedure to send documents using one-touch speed dialling:
1
Open the document tray (MultiPASS models
only).
2
Adjust the document feed lever for the
document you are loading. (
3
Prepare the document and load it, face down,
in the ADF. ( p. 4-4)
• For colour sending, press Colour/B&W (Color/
B&W) to turn on its light. (
• To adjust the resolution and contrast,
7-5.
4
Press the one-touch speed dialling button
assigned to the number you wish to fax.
• The number registered under that one-touch
speed dialling button is displayed.
• If you press the wrong button, press Stop, then
press the correct button.
• appears if no fax number is assigned
to the one-touch speed dialling button you
pressed.
5
Press Start (Start/Scan) to begin scanning
for sending, or wait a few seconds for the unit
to begin scanning automatically.
• If you prefer the unit never to scan a document
automatically after a few seconds, disable the
setting. (
n • You can also use one-touch speed dialling to send a document to more than one destination at a
time. ( p. 7-14)
• To dial a telephone number registered for one-touch speed dialling, simply lift the handset and
press the one-touch speed dialling button.
Chapter 6
p. 4-2)
p. 7-3)
pp. 7-4,
p. 14-6)
p. 6-3)
Ex:
(Currently used memory)
(Standby to scan)
Ex:
Speed Dialling 6-5