Printing On Fabric Sheets - Canon C75, C80, C70 User Manual

Printing on Fabric Sheets

Canon Fabric Sheet FS-101 comes with a booklet that describes special handling procedures.
Be sure to read this booklet for special information on fabric sheets.
n • Do not use the fixing agent provided with the Canon Fabric Sheet FS-101. This agent is not
necessary when printing with your unit.
• Do not touch newly printed fabric sheets until the ink has dried completely. This takes about an
hour.
Follow this procedure to load a fabric sheet in the multi-purpose tray:
1
Make sure the paper thickness lever is set to
(right).
e
• For details, p. 5-6.
c Do not set the paper thickness lever
while the unit is printing since this will
cause problems.
2
With the cloth side towards you and the open
end at the top, insert one fabric sheet into the
multi-purpose tray q, and align the right edge
of the sheet with the right side of the multi-
purpose tray. Slide the paper guide snugly
against the left edge of the sheet w.
3
Your unit is now ready to print. Set your PC to
print on the fabric sheet.
4
When the fabric sheet is printed, let it dry for
about an hour to allow the ink to dry
completely.
5
When dry, peel the film backing from the
printed fabric sheet.
Chapter 5
C
a I n
B
r t k
C
r i
B d
l -
g
l a
2 e
M c 1
a k
J d
a e
p
a i n
n
Open end at the
top
2
Paper Handling
1
5-13