Assembling Your Unit - Canon C75, C80, C70 User Manual

Assembling Your Unit

Follow this procedure to assemble your unit:
Hold the document support
so that it curves towards the
back of the unit and fit the
tabs on the support into the
slots above the ADF.
FAX Models Only
Hold the extension as shown and slide it into the rails on the back of the document tray. Then
slide the inner section of the extension into the inner rails on the document tray.
Attach the document tray to the unit by fitting the slots on the tray into the tabs on the unit.
n • To see how your unit looks fully assembled,
• For details on attaching the optional handset to your unit,
Chapter 2
MultiPASS Models Only
Your unit comes with the
document tray already
attached. However, if you
accidentally remove the tray,
attach it by fitting the slots on
the tray into the tabs on the
unit.
p. 2-10.
Appendix B.
Setting Up 2-5