Registering Speed Dialling With The M Button - Canon C75, C80, C70 User Manual

7
Press Start (Start/Scan) to begin scanning
for sending.
• The unit automatically dials the access and ID
codes registered under the M button and then
dials the other party's fax number.
• To cancel sending once dialling has started, press
Stop then T. (
n • To protect your access and ID codes, these are not printed on any reports.
• If you frequently call the same numbers with this feature, you can register the access and ID
codes together with a fax/telephone number for speed dialling. (

Registering Speed Dialling With the M Button

By registering your access and ID codes together with the fax/telephone number for one-
touch speed dialling or coded speed dialling, you can send documents or make calls over
these services at the press of one or a few buttons and without having to press M.
• You must first register the access and ID codes under the M button before you can register the M
n
button under speed dialling entries. (
• For details on registering numbers for speed dialling,
Follow this procedure to register the M button settings for speed dialling:
1
During speed dialling registration, when you
come to the step that requires you to enter
the fax/telephone number, press M.
2
Use the numeric buttons to enter the fax/
telephone number you want to register.
3
Continue with the procedure for registering
entries for one-touch or coded speed dialling.
Once you have completed the above procedure, you can simply press the one-touch speed
dialling button or press Coded Dial and enter the coded speed dialling code to dial the fax/
telephone number using the UK Call, Global Call, or Day Call Service of Cable and Wireless
Communications Limited.
7-24 Sending Faxes
p. 7-10)
p. 7-22)
Chapter 6.
below)
Ex:
Ex:
Chapter 7