Image Formation System; Overview - Canon imageRUNNER ADVANCE C3330 Series Service Manual

Image Formation System

Overview

■ Specifications
Item
Photosensitive Drum
Developing Unit
Primary Charging
Toner Container
Transfer method
ITB Unit
Primary transfer
Secondary transfer
Separation method
■ Parts Configuration
No.
1 ITB Unit
2 Driving the Toner Bottles
Material : OPC
Drum diameter : 30 mm in diameter
Cleaning : Cleaning Blade
Process speed
1/1 speed: 119.4 mm/s
1/2 speed: 59.7 mm/s
Drum Heater : None
Developing Cylinder : 1 cylinder (single-developing method)
Developing method : Dry, 2-component development + ACR method (ACR: Auto Carrier Refresh)
Toner : Non-magnetic negative toner
Toner level detection : Yes (Toner Density Sensor is also used)
Charging method : Roller charging
Cleaning : Sponge Roller
Toner Container detection : Yes
Replacement of Toner Container (during continuous print) : Disabled
Intermediate transfer (ITB)
Circumferential length : Inner circumferential length: 791.9 mm
Cleaning : Cleaning Blade
Belt displacement correction : Controlled by rib
Transfer method : Transfer Roller
Disengagement mechanism : Yes
Transfer method : Transfer Roller
Disengagement mechanism : None
Cleaning : Static cleaning
Curvature separation + Static Eliminator
Y M
Y
[1]
[5]
Function/Method
C
BK
M C BK
Name
62
2. Technology
[2]
[3]
[4]