4
Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Drum Unit
Disassembly/Assembly - Image Formation System -
Removing the Waste Toner Container
Procedure
1) Open the Waste Toner Cover.
2) Remove the Waste Toner Container.
3) Remove the attached cap to install to the Waste Toner Container.
4
Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Drum Unit
Removing the Drum Unit
Procedure
NOTE:
In this procedure, procedure for (Bk) is described. Be sure to perform the same
procedure for (C), (M), and (Y).
1) Open the Front Cover.
2) Open the Drum Unit retaining cover.
F-4-69
3) Open the handle and pull out the Drum Unit.
F-4-70
4-53
F-4-71
F-4-72
4-53