Canon imageRUNNER ADVANCE C3330 Series Service Manual page 103

NOTE:
The toner container premature replacement detection function utilizes the Bottle New/Old Sensor, and does not work for
unidentified Toner Containers.
Control description
Display a message when the Toner Container
Detection tim- When the Toner Container is removed before the
ing message "Replace the toner cartridge." (refer to
"Toner Level Detection") is displayed.
Alert/ The message shown below is displayed with an
message dis- alert tone. *1
played "The Toner Container of the color shown below that
can still be used has been removed."
Operation
while the mes-
sage is dis-
played
How to clear Install the removed container again, and close the
Front Cover of the host machine.
Default setting
Alarm code *5
*1: The alert tone generated when a message is displayed can be switched ON or OFF in the menu shown below.
Volume Control > Audible Tones > Non-Empty Toner Rplcd. Tone
*2: If the Toner Container that had been installed before the container was replaced cannot be installed, execute the following
service mode (Lv. 2) to clear the suspension of operation triggered by premature replacement of the Toner Container.
COPIER > OPTION > USER > TNRBEXGR
*3: It can be changed in the following service mode (Lv. 2).
COPIER > OPTION > USER > TNRBRMVR
*4: It can be changed in the following service mode (Lv. 2).
COPIER > OPTION > USER > TNRBEXGR
*5: A toner replacement completion alarm is not generated under the following conditions:
• The DC Controller PCB is replaced, and then a new Toner Bottle is installed before the power is turned ON.
• The DC Controller PCB is replaced, the power is turned ON with the Toner Bottle removed or the Front Door opened, and
then a new Toner Bottle is installed.
Related Control Panel menu
Volume Control > Audible Tones > Non-Empty Toner Rplcd. Tone
Related service mode
• ON/OFF of suspension of operation triggered by premature replacement of the Toner Container (Lv. 2)
COPIER > OPTION > USER > TNRBRMVR
is removed
Allowed
ON (Display) *3
10-0100-007x: Number of installations of new Toner Containers (each color)
10-0100-018x: Number of installations of unidentified Toner Bottles (each color)
Suspend operation when the Toner Contain-
er is prematurely replaced
When the Toner Container is replaced before the
message "Replace the toner cartridge." (refer to
"Toner Level Detection") is displayed.
The Toner Container of the color shown below that
can still be used has been replaced. Perform the
recovery procedure.
Operation is suspended.
Install the Toner Container that had been installed
before the container was replaced, and close the
Front Cover of the host machine. *2
OFF (Not display) *4
10-0100-008x: Not used
91
2. Technology
Complete
the toner re-
placement
When it has
been detected
that the Toner
Container was
replaced cor-
rectly
None
-
-
-