Removing The Itb Unit - Canon imageRUNNER ADVANCE C3330 Series Service Manual

2. Remove the Secondary Transfer Outer Roller [1].
CAUTION:
Points to Note at Installation:
Remove the Protection Sheet [1] from the new Secondary Transfer Outer Roller after installation.
Pull the tape [2] on the Protection Sheet [1] in the direction of the arrow to remove the sheet.
NOTE:
• Parts Counter : COPIER > COUNTER > DRBL-1 > 2TR-ROLL
• It is also cleared at the same time when R-DOOR is cleared.

Removing the ITB Unit

■ Preparation
CAUTION:
If the ITB Unit is replaced in sleep mode or the power is turned OFF in sleep mode, the Primary Transfer Roller is not
disengaged and the ITB Unit can not be pulled out. Set standby mode to replace the ITB Unit.
[1]
[1]
[2]
[1]
325
4. Parts Replacement and Cleaning