Canon imageRUNNER ADVANCE C3330 Series Service Manual page 218

■ Enabling UGW Link
To execute [UGW-linked Download and Update] or [UGW-linked Download] when installing the firmware, the service technician
must specify the following settings to link with UGW in advance.
Set "1" in the following service mode.
• COPIER >Option >FNC-SW >CDS-UGW
Specify "Set" for the following settings.
• [Firmware Distribution] on the [Customer Management] screen of the UGW WebPortal settings
NOTE:
• See "imageWARE Remote Operator's Manual / e-Maintenance Business Operation Manual" for how to operate UGW
WebPortal.
• [Distribute Firmware] should be set on [Customer Management] screen for staff in charge of setting for [Enter customer
information] or [Command for firmware distribution] in order to allow them to select the desired device on [Firmware Distribution
Information] screen.
• If [Distribute Firmware] is not shown on [Customer Management] screen of UGW WebPortal, appropriate authorities may not
be set to each account in Firmware Distribution Information. Contact the Sales Company HQ concerned for confirmation.
■ Enabling [Update Firmware] Button
To allow users to install firmware using Updater, the setting of firmware installation should be set to ON for users in advance.
Set "1" in the following service mode.
• COPIER >Option >FNC-SW > CDS-FIRM
• [Settings/Registration] screen for Updater when the setting is not enabled (CDS-FIRM(0)):
• [Settings/Registration] screen for Updater when the setting is enabled (CDS-FIRM(1)):
■ Enabling [Install Application/Options] Button
To allow users to install applications using Updater, the setting of application installation should be set to ON for users in advance.
Set "1" in the following service mode.
• COPIER >Option >FNC-SW >CDS-MEAP
• [Settings/Registration] screen of Updater when the setting is not enabled (CDS-MEAP(0)):
206
2. Technology