Preparations For The Installation - AGFA ADC Compact Plus Manual

Controls, Connections and Setup Procedures
5.3
Chapter 1 / 20

Preparations for the Installation

The following work should be performed before the system components are
installed:
· Laying of the network cables (Ethernet).
· Creation and Adaptation of the configuration file adc.cpf, together with the
application specialist.
We recommend, to create and adapt the configuration file adc.cpf, which is
used by all ADC System Components, before starting the installation. This
allows you a smooth installation.
For detailed information see ADC System Components, DD+DIS198.00E,
chapter 6.2.
ADC Compact Plus
(Type 5146)
DD+DIS064.02E
Edition 1, Revision 4