Table of Contents
Advertisement
Factory default FortiGate configuration settings
Factory default Transparent mode network configuration
Factory default firewall configuration
24
If you switch the FortiGate unit to Transparent mode, it has the default network
configuration listed in
Table
Table 4: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Management access
The factory default firewall configuration is the same in NAT/Route and Transparent
mode.
Table 5: Factory default firewall configuration
Internal
Internal_All
Address
External
External_All
Address
Recurring
Always
Schedule
Firewall
Int->Ext
Policy
Source
Destination External_All
Schedule
Service
Action
NAT
4.
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
Internal
External
IP: 0.0.0.0
Represents all of the IP addresses on the internal
network.
Mask: 0.0.0.0
IP: 0.0.0.0
Represents all of the IP addresses on the external
network.
Mask: 0.0.0.0
The schedule is valid at all times. This means that
the firewall policy is valid at all times.
Firewall policy for connections from the internal
network to the external network.
Internal_All
The policy source address. Internal_All means that
the policy accepts connections from any internal IP
address.
The policy destination address. External_All means
that the policy accepts connections with a
destination address to any IP address on the
external network.
Always
The policy schedule. Always means that the policy
is valid at any time.
ANY
The policy service. ANY means that this policy
processes connections for all services.
ACCEPT
The policy action. ACCEPT means that the policy
allows connections.
NAT is selected for the NAT/Route mode default
policy so that the policy applies network address
translation to the traffic processed by the policy.
NAT is not available for Transparent mode policies.
Getting started
admin
(none)
10.10.10.1
255.255.255.0
207.194.200.1
207.194.200.129
HTTPS, Ping
Ping
Fortinet Inc.
Advertisement
Table of Contents
