Table of Contents
Advertisement
System status
Viewing virus and intrusions status
FortiGate-50R Installation and Configuration Guide
3
Set the automatic refresh interval and select Go to control how often the web-based
manager updates the display.
More frequent updates use system resources and increase network traffic. However,
this only occurs when you are viewing the display using the web-based manager.
4
Select Refresh to manually update the information displayed.
Use the virus and intrusions status display to track when viruses are found by the
FortiGate antivirus system and to track when the NIDS detects a network-based
attack.
1
Go to System > Status > Monitor.
2
Select Virus & Intrusions.
Virus and intrusions status is displayed. The display includes bar graphs of the
number viruses and intrusions detected per hour as well as line graphs of the number
of viruses and intrusions detected for the last 20 hours.
Figure 3: Sessions and network status monitor
3
Set the automatic refresh interval and select Go to control how often the web-based
manager updates the display.
More frequent updates use system resources and increase network traffic. However,
this only occurs when you are viewing the display using the web-based manager. The
line graph scales are shown on the upper right corner of the graph.
4
Select Refresh to manually update the information displayed.
System status
69
Advertisement
Table of Contents
