Configuring PPTP
Configuring the FortiGate unit as a PPTP gateway
180
Figure 29: PPTP VPN between a Windows client and the FortiGate unit
Use the following procedures to configure the FortiGate unit as a PPTP gateway:
Adding users and user groups
To add a user for each PPTP client:
1
Go to User > Local.
2
Add and configure PPTP users.
See
"Adding user names and configuring authentication" on page
3
Go to User > User Group.
4
Add and configure PPTP user groups.
See
"Configuring user groups" on page
Enabling PPTP and specifying an address range
1
Go to VPN > PPTP > PPTP Range.
2
Select Enable PPTP.
3
Enter the Starting IP and the Ending IP for the PPTP address range.
4
Select the User Group that you added in
page
180.
5
Select Apply to enable PPTP through the FortiGate unit.
151.
"Adding users and user groups" on
PPTP and L2TP VPN
146.
Fortinet Inc.