Table of Contents
Advertisement
Factory default Transparent mode network configuration
Factory default Transparent mode network configuration
Factory default firewall configuration
18
In Transparent mode, the FortiGate unit has the default network configuration listed in
Table
3.
Table 3: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Administrative access
FortiGate firewall policies control how all traffic is processed by the FortiGate unit.
Until firewall policies are added, no traffic can be accepted by or pass through the
FortiGate unit. To allow traffic through the FortiGate unit you can add firewall policies.
See the FortiGate Administration Guide for information about adding firewall policies.
The following firewall configuration settings are included in the default firewall
configuration to make it easier to add firewall policies.
Table 4: Default firewall configuration
Configuration setting Name
Firewall address
Pre-defined service
Recurring schedule
Protection Profiles
The factory default firewall configuration is the same in NAT/Route and Transparent
mode.
01-28005-0101-20041015
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
LAN
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Description
All
Firewall address matches the source or
destination address of any packet.
More than 50
Select from any of the 50 pre-defined services
predefined services
to control traffic through the FortiGate unit that
uses that service.
Always
The recurring schedule is valid at any time.
Strict, Scan, Web,
Control how the FortiGate unit applies virus
Unfiltered
scanning, web content filtering, spam filtering,
and IPS.
Getting started
admin
(none)
10.10.10.1
255.255.255.0
207.194.200.1
207.194.200.129
HTTPS, Ping
Ping
Ping
Ping
HTTPS, Ping
Ping
Ping
Fortinet Inc.
Advertisement
Table of Contents
