Table of Contents
Advertisement
Getting started
Factory default NAT/Route mode network configuration
Factory default Transparent mode network configuration
FortiGate-60R Installation and Configuration Guide
When the FortiGate unit is first powered on, it is running in NAT/Route mode and has
the basic network configuration listed in
connect to the FortiGate unit web-based manager and establish the configuration
required to connect the FortiGate unit to your network. In
management access means you can connect to the web-based manager using this
interface. Ping management access means this interface responds to ping requests.
Table 3: Factory default NAT/Route mode network configuration
Administrator
account
Internal interface
WAN1 interface
WAN2 interface
DMZ interface
If you switch the FortiGate unit to Transparent mode, it has the default network
configuration listed in
Table
Table 4: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Management access
Factory default FortiGate configuration settings
Table
User name:
Password:
IP:
Netmask:
Management Access:
Addressing Mode:
Management Access:
IP:
Netmask:
Management Access:
IP:
Netmask:
Management Access:
4.
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
Internal
WAN1
WAN2
DMZ
3. This configuration allows you to
Table 3
HTTPS
admin
(none)
192.168.1.99
255.255.255.0
HTTPS, Ping
DHCP
Ping
192.168.101.99
255.255.255.0
Ping
10.10.10.1
255.255.255.0
HTTPS, Ping
admin
(none)
10.10.10.1
255.255.255.0
207.194.200.1
207.194.200.129
HTTPS, Ping
Ping
Ping
HTTPS, Ping
33
Advertisement
Table of Contents
