Factory Default Transparent Mode Network Configuration; Factory Default Firewall Configuration - Fortinet FortiGate FortiGate-500 Installation Manual

Getting started

Factory default Transparent mode network configuration

Factory default firewall configuration

FortiGate-500 Installation Guide
In Transparent mode, the FortiGate unit has the default network configuration listed in
Table 3.
Table 3: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Administrative access
FortiGate firewall policies control how all traffic is processed by the FortiGate unit.
Until firewall policies are added, no traffic can be accepted by or pass through the
FortiGate unit. To allow traffic through the FortiGate unit you can add firewall policies.
See the FortiGate Administration Guide for information about adding firewall policies.
The following firewall configuration settings are included in the default firewall
configuration to make it easier to add firewall policies.
01-28004-0023-20040830
Factory default FortiGate configuration settings
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
Internal
External
DMZ
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
admin
(none)
10.10.10.1
255.255.255.0
207.194.200.1
207.194.200.129
HTTPS, Ping
Ping
HTTPS, Ping
Ping
Ping
Ping
Ping
Ping
Ping
Ping
Ping
19