Table of Contents
Advertisement
PPTP and L2TP VPN
10
12
Configuring L2TP
FortiGate-50R Installation and Configuration Guide
Make sure that the following options are selected:
•
TCP/IP
•
QoS Packet Scheduler
11
Make sure that the following options are not selected:
•
File and Printer Sharing for Microsoft Networks
•
Client for Microsoft Networks
Select OK.
Connecting to the PPTP VPN
1
Connect to your ISP.
2
Start the VPN connection that you configured in the previous procedure.
3
Enter your PPTP VPN User Name and Password.
4
Select Connect.
5
In the connect window, enter the User Name and Password that you use to connect to
your dialup network connection.
This user name and password is not the same as your VPN user name and password.
Some implementations of L2TP support elements of IPSec. These elements must be
disabled when L2TP is used with FortIgate units.
Note: L2TP VPNs are only supported in NAT/Route mode.
This section describes:
•
Configuring the FortiGate unit as a L2TP gateway
•
Configuring a Windows 2000 client for L2TP
•
Configuring a Windows XP client for L2TP
Configuring L2TP
185
Advertisement
Table of Contents
