Table of Contents
Advertisement
Transparent mode installation
Completing the configuration
Setting the date and time
Enabling antivirus protection
Registering your FortiGate
Configuring virus and attack definition updates
FortiGate-50R Installation and Configuration Guide
Use the information in this section to complete the initial configuration of the FortiGate
unit.
For effective scheduling and logging, the FortiGate system date and time should be
accurate. You can either manually set the date and time or you can configure the
FortiGate unit to automatically keep its date and time correct by synchronizing with a
Network Time Protocol (NTP) server.
To set the FortiGate system date and time, see
page
101.
To enable antivirus protection to protect users on your internal network from
downloading a virus from the Internet:
1
Go to Firewall > Policy > Int->Ext.
2
Select Edit
to edit this policy.
3
Select Anti-Virus & Web filter to enable antivirus protection for this policy.
4
Select the Scan Content Profile.
5
Select OK to save your changes.
After purchasing and installing a new FortiGate unit, you can register the unit by going
to System > Update > Support, or using a web browser to connect to
http://support.fortinet.com and selecting Product Registration.
Registration consists of entering your contact information and the serial numbers of
the FortiGate units you or your organization have purchased. Registration is quick and
easy. You can register multiple FortiGate units in a single session without re-entering
your contact information.
For more information about registration, see
You can configure the FortiGate unit to automatically check to see if new versions of
the virus definitions and attack definitions are available. If it finds new versions, the
FortiGate unit automatically downloads and installs the updated definitions.
The FortiGate unit uses HTTPS on port 8890 to check for updates. The FortiGate
external interface must have a path to the FortiResponse Distribution Network (FDN)
using port 8890.
To configure automatic virus and attack updates, see
definitions" on page
71.
Completing the configuration
"Setting system date and time" on
"Registering FortiGate units" on page
"Updating antivirus and attack
81.
45
Advertisement
Table of Contents
