Factory Default Transparent Mode Network Configuration; Factory Default Firewall Configuration - Fortinet FortiGate FortiGate-50A Installation Manual

Antivirus firewalls
Hide thumbs Also See for FortiGate FortiGate-50A:
Table of Contents

Advertisement

Getting started

Factory default Transparent mode network configuration

Factory default firewall configuration

FortiGate-50A Installation Guide
In Transparent mode, the FortiGate unit has the default network configuration listed in
Table
4.
Table 4: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Administrative access
FortiGate firewall policies control how all traffic is processed by the FortiGate unit.
Until firewall policies are added, no traffic can be accepted by or pass through the
FortiGate unit. The factory default configuration contains one firewall policy that allows
all traffic originating on the internal network to access the Internet. No other traffic is
allowed through the FortiGate unit. To allow traffic through the FortiGate unit you can
add firewall policies. See the FortiGate Administration Guide for information about
adding firewall policies.
The following firewall configuration settings are included in the default firewall
configuration to make it easier to add firewall policies.
Table 5: Default firewall configuration
Configuration setting Name
Firewall policy
Firewall address
Pre-defined service
Recurring schedule
Protection Profiles
The factory default firewall configuration is the same in NAT/Route and Transparent
mode.
01-28008-0017-20050128
Factory default FortiGate configuration settings
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
Internal
External
Description
Internal -> External Source: All Destination: All
All
Firewall address matches the source or
destination address of any packet.
More than 50
Select from any of the 50 pre-defined services
predefined services
to control traffic through the FortiGate unit that
uses that service.
Always
The recurring schedule is valid at any time.
Strict, Scan, Web,
Control how the FortiGate unit applies virus
Unfiltered
scanning, web content filtering, spam filtering,
and IPS.
admin
(none)
10.10.10.1
255.255.255.0
207.194.200.1
207.194.200.129
HTTPS, Ping
Ping
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate 50a

Table of Contents