Checking The Frame; Checking The Swingarm; Checking The Routing Of The Throttle Cable - Husqvarna 2016 FE 250 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.41

Checking the frame

12.42

Checking the swingarm

12.43

Checking the routing of the throttle cable

–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a mechanical impact:
–
Change the frame.
401799-01
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401520-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check the routing of the throttle cable.
Both throttle cables must be routed to the throttle valve body side by side
behind the handlebars and above the fuel tank bearing.
» If the throttle cable is not routed as specified:
–
Correct the routing of the throttle cable.
H00252-01
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
Info
Always replace a frame that has been damaged due to a mechan-
ical impact. Repair of the frame is not authorized by Husqvarna
Motorcycles.
Info
Always change a damaged swingarm. Repair of the swingarm is
not authorized by Husqvarna Motorcycles.
p. 49)
( p. 59)
( p. 60)
p. 50)
65