Adjusting The Rebound Damping Of The Fork; Handlebar Position; Adjusting The Handlebar Position - Husqvarna 2016 FE 250 Owner's Manual

11 TUNING THE CHASSIS
11.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
11.14

Handlebar position

11.15

Adjusting the handlebar position

Warning
Danger of accidents Handlebar breakage.
–
If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace han-
dlebar.
Guideline
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
–
Turn red adjusting screw
Info
Adjusting screw
The rebound damping is located in right fork leg REB (red adjusting
screw). The compression damping is located in left fork leg COMP (white
adjusting screw).
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
H00212-11
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
On the upper triple clamp, there are two holes at a distance of
Hole distance
The holes on the handlebar supports are placed at a distance of
Hole distance
The handlebar supports can be mounted in four different positions.
101859-10
 all the way clockwise.

is located at the upper end of the right fork leg.
 15 mm (0.59 in)
3.5 mm (0.138 in)

14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks

to each other.

from the center.
40