Frame; Removing The Engine Guard; Installing The Engine Guard; Checking The Frame - Husqvarna 701 Enduro 2017 Repair Manual

8 FRAME
43
8.1 Removing the engine guard
Remove screws O
on
the left and right.
Pull the engine guard forward out of the holders and remove it.
ps.
o
S01036-10
8.2 Installing the engine guard
Slide the engine guard into holders Q at the rear.
Position the engine guard. Mount and tighten screws
©
Guideline
\j. ■ m
% ft
m
10 Nm (7.4 Ibf ft) Remaining screws, chassis M6
© A
o
S01036-11
Checking the frame 8.3
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a mechanical impact:
- Change the frame.
A
a
Info
Always replace a frame that has been damaged due to a mechan­
ical impact. Repair of the frame is not authorized by Husqvarna
Motorcycles.
I
D03384-10