Husqvarna 2016 FE 250 Owner's Manual page 101

18 SERVICE WORK ON THE ENGINE
Main work
–
Remove the oil filler plug
–
Fill engine oil to the middle
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
M00444-10
Finishing work
–
Check the engine oil level. (
 with the O-ring from the clutch cover.

of the level viewer.
p. 113)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without
an effective exhaust extraction system.
p. 96)
99