Changing The Glass Fiber Yarn Filling Of The Main Silencer - Husqvarna 2016 FE 250 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
Main work
–

Remove screws and take off silencer cap
Warning
Danger to health Soot particles irritate the eyes and mucuous membranes.
–
Wear suitable breathing and eye protection when cleaning the main silencer and carbon screen.
–
Clean main silencer housing
–

Mount a new O-ring
–

Position silencer cap
Guideline
Screws on the main silencer
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
12.31

Changing the glass fiber yarn filling of the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.

with O-ring
 
and screen of the spark arrestor with compressed air.

on silencer cap .
. Mount and tighten screws
p. 53)
p. 52)
Preparatory work
–
Remove the right side cover. (
–
Remove the main silencer. (

.

.
M5
p. 52)
p. 52)
402269-10
7 Nm (5.2 lbf ft)
54