Removing The Shock Absorber; Installing The Shock Absorber; Removing The Seat - Husqvarna 2016 FE 250 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.16

Removing the shock absorber

12.17

Installing the shock absorber

12.18

Removing the seat

–
Check the headlight setting. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the right side cover. (
–
Remove the main silencer. (
–
Remove the seat. (
–
Remove the manifold.
Main work
–
Carefully take the shock absorber out of the vehicle toward the top.
H00222-01
Main work
–
Carefully position the shock absorber into the vehicle from above.
H00222-01
Finishing work
–
Install the manifold.
–
Mount the seat. (
–
Install the main silencer. (
–
Install the right side cover. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
H00182-10
–
Raise the rear of the seat, push the seat back, and lift it off.
H00183-11
p. 88)
p. 42)
p. 52)
p. 52)
p. 49)
( p. 56)
( p. 57)
p. 50)
p. 53)
p. 52)

in the recessed grips on the left and right.
p. 42)
49