Idle Speed Adjusting Screw; Shift Lever; Foot Brake Lever - Husqvarna 2016 FE 250 Owner's Manual

6 CONTROLS
6.17

Idle speed adjusting screw

6.18

Shift lever

6.19

Foot brake lever

Idle speed adjusting screw
The idle speed adjusting screw has two functions.
Turning it controls the idle speed.
Pulling it out all the way raises the idle speed during a cold start.
Possible states
RPM increase activated – Idle speed adjusting screw is pulled out all the way.
•
RPM increase deactivated – Idle speed adjusting screw is pushed in all the way.
•
C00533-10

Shift lever
401950-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
401950-11
The foot brake lever
The foot brake lever is used to activate the rear brake.
401956-10

is located at the top left of the throttle valve body.
is mounted on the left side of the engine.

is attached in front of the right footrest.
18