Table of Contents
Advertisement
H
Press [Connection Test] to check the path is set correctly.
I
Press [OK].
J
Press [Exit].
Note
❒ To change the name, key display and title, see "Changing a Registered
Name".
Reference
p.210 "Changing a Registered Name"
p.241 "To locate the SMB folder manually"
p.241 "To locate the SMB folder using Browse Network"
To change the protocol
This section describes how to change the protocol.
A
Press [FTP] or [NCP].
B
A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous proto-
col.
C
Enter each item again.
Reference
p.250 "Using NCP to Connect"
p.245 "Using FTP to Connect"
Registering Folders
243
7
Advertisement
Table of Contents
