Ricoh 7650 Operating Instructions Manual page 53

❖ Paper Type: Tray 2, Paper Type: Tray 3
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function use this information to automatically select the paper
tray.
The paper types you can set are as follows:
• Paper Type
• No Display
• Recycled Paper
• Preprinted Paper
• Special Paper
• Thick Paper
• Prepunched Paper
• Colour Paper 1
• Colour Paper 2
• Bond Paper
• Translucent Paper
• Letterhead
The default setting for "Paper Type" is No Display.
The default setting for "Copying Method in Duplex" is 2 Sided Copy.
The default setting for "Apply Auto Paper Select" is Yes.
❖ Front Cover Sheet Tray
Allows you to specify and display the paper tray that is setting cover sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
The default setting is Off.
❖ Back Cover Sheet Tray
Specify which paper tray you want to load the back covers from, and make
sure confirmation of your setting is displayed. When you have selected the
tray, specify the confirmation timing and the copy method for two-sided cop-
ying.
The default setting is Off.
❖ Slip Sheet Tray
Specify which paper tray you want to load the insertion sheets from, and
make sure confirmation of your setting is displayed. When you have selected
the tray, specify the confirmation timing.
The default setting is Off.
❖ Designation Sheet 1 Tray, Designation Sheet 2 Tray
Specify which paper tray you want to load the chapter division sheets from,
and make sure confirmation of your setting is displayed. When you have se-
lected the tray, specify the confirmation timing and the copy method for two-
sided copying.
The default setting is Off.
Tray Paper Settings
43
2