Ricoh 7650 Operating Instructions Manual page 108

Copier/Document Server Features
❖ Stamp Format
You can specify how each of stamp is printed.
• Stamp Position
You can specify where to print the stamp.
The default setting is Top Right.
• Stamp Position
You can adjust the position of the stamp within the available range as
shown below.
Metric version:
• "Top Left"...T/B: 4-144mm, L/R: 4-144mm
3
• "Top Centre"...T/B: 4-144mm, L/R: 72-72mm
• "Top Right"...T/B: 4-144mm, L/R: 4-144mm
• "Centre Left"...T/B: 72-72mm, L/R: 4-144mm
• "Centre"...T/B: 72-72mm, L/R: 72-72mm
• "Centre Right"...T/B: 72-72mm, L/R: 4-144mm
• "Bottom Left"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Centre"...T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"...T/B: 4-144mm, L/R: 4-144mm
Inch version:
• "Top Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Top Centre"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Top Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Centre Left"...T/B: 2.8"-2.8", L/R: 0.1"-5.7"
• "Centre"...T/B: 2.8"-2.8", L/R: 2.8"-2.8"
• "Centre Right"...T/B: 2.8"-2.8", L/R: 0.1"-5.7"
• "Bottom Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Bottom Centre"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Bottom Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• Size
You can set the size of the stamp.
The default setting is 1 X.
• Density
You can set the pattern used to print the stamp.
• Normal
The stamp is printed on the image. You cannot check which parts will
overlap.
• Lighter
The image can be seen through the stamp.
• Lightest
The image appears even clearer than in the Lighter setting.
The default setting is Normal.
98