Table of Contents
Advertisement
Facsimile Features
❖ Program Fax Information
Program information to be shown on the display of the other machine and
printed as a report. The following information can be programmed.
• Fax Header
• Own Name
• Own Fax Number
For details about how to program Fax Information, see "Registering Fax In-
formation".
❖ Enable H.323
Specify whether or not H.323 is used for IP-Fax transmission.
The default setting is Off.
❖ Enable SIP
4
Specify whether or not SIP is used for IP-Fax transmission.
The default setting is Off.
❖ H.323 Settings
Set the IPv4 address or host name, and alias telephone number of the gate-
keeper.
If you select [On] using the User Parameters, you can use the gatekeeper serv-
er. See "Parameter Settings" ( switch 34, bit 0).
You can use numbers, and symbols ("#" and "*") for registration of the alias
telephone number in H.323 Settings. Make sure you enter these characters
correctly.
A
Press [Facsimile Features].
B
Press [Initial Settings].
C
Press [H.323 Settings].
D
Press [Change] for each property.
E
Enter the IPv4 address or host name, and alias telephone number and
press [OK].
F
Press [OK].
134
Advertisement
Table of Contents
