Ricoh 7650 Operating Instructions Manual page 49

❖ Output: Copier (copier)
You can specify a tray to which documents are delivered.
1.
Copy Tray
2.
Finisher Upper Tray
The default setting is Copy Tray.
❖ Output: Document Server (Document Server)
You can specify a tray to which documents are delivered.
The default setting is Copy Tray.
❖ Output: Facsimile (facsimile)
Specify a tray to which documents are delivered.
The default setting is Copy Tray.
❖ Output: Printer (printer)
You can specify a tray to which documents are delivered.
The output trays set on the printer driver have priority over the output tray
specified below.
The default setting is Copy Tray.
❖ ADF Original Table Elevation
Set when to raise the ADF plate after placing originals on the Auto Document
Feeder (ADF).
The default setting is When Original is Set.
❖ System Status/Job List Display Time
You can specify how long to display the System Status and Job List display
for.
The default setting is On, 15 second(s).
By selecting [On], you can specify a display time between 10 and 999 seconds.
AMM005S
3.
Finisher Shift Tray
General Features
2
39