Programming/Changing Special Senders - Ricoh 7650 Operating Instructions Manual

Programming/Changing Special Senders

This section describes how to Program and change Special Senders.
A
Press [Facsimile Features].
B
Press [Reception Settings].
C
Press [Program Special Sender].
D
Check [Program / Change] is selected.
E
Select the sender to program or change.
F
Enter a sender name, and then press [OK].
Enter a destination name using Own Name or Own Fax Number.
G
Press [Full Agreement] or [Partial Agreement].
Special Senders to Treat Differently
4
161