Ricoh 7650 Operating Instructions Manual page 52

System Settings
❖ Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
• No Display
• Recycled Paper
• Preprinted Paper
• Special Paper
2
• Thick Paper
• Prepunched Paper
• Colour Paper 1
• Colour Paper 2
• Bond Paper
• Letterhead
• Translucent Paper
• Card Stock
• OHP (Transparency)
• Label Paper
The default setting is No Display.
❖ Paper Type: Tray 1
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function use this information to automatically select the paper
tray.
The paper types you can set are as follows:
• Paper Type
• No Display
• Recycled Paper
• Preprinted Paper
• Special Paper
• Thick Paper
• Prepunched Paper
• Colour Paper 1
• Colour Paper 2
• Bond Paper
• Letterhead
• Translucent Paper
The default setting for "Paper Type" is No Display.
The default setting for "Copying Method in Duplex" is 2 Sided Copy.
The default setting for "Apply Auto Paper Select" is Yes.
42