Ricoh 7650 Operating Instructions Manual page 78

System Settings
❖ Program / Change / Delete LDAP Server
Program the LDAP server to find up e-mail destinations in the LDAP server
Address Book directly. This function is possible when sending scan files by e-
mail using the scanner or fax function.
• Name
• Server Name
• Search Base
2
• Port Number
• Use Secure Connection (SSL)
• Authentication
• User Name
• Password
• Search Conditions
• Search Options
To start an LDAP search, make sure that the items listed below are set. For
other items, check your environment and make any necessary changes.
• Server Name
• Search Base
• Port Number
• Authentication
• Search Conditions
To use the LDAP server in Administrator Tools, select [On] under LDAP serv-
er.
This function supports LDAP Version 2.0 and 3.0. Ver 2.0 does not support
High Security authentication.
❖ LDAP Search
You can specify whether or not to use the LDAP server for searching.
The default setting is Off.
If you select [Off], [LDAP Search] will not appear on the searching display.
❖ AOF (Always On)
Specify whether or not to use Auto Off.
The default setting is On.
❖ Firmware Version
You can check the version of the software installed in this machine.
❖ Network Security Level
For details about this function, consult your administrator.
❖ Auto Erase Memory Setting
For details about this function, consult your administrator.
❖ Erase All Memory
For details about this function, consult your administrator.
68