User Stamp - Ricoh 7650 Operating Instructions Manual

• Page to Stamp
You can have the stamp printed on the first page or all pages.
The default setting is All Pages.
Reference
"Preset Stamp", Copy/ Document Server Reference

User Stamp

This section describes the user tools in the User Stamp menu under Stamp.
Default settings are shown in bold type.
❖ Program / Delete Stamp
You can register, change, or delete these designs as user stamps.
You can register up to four custom stamps with your favourite designs.
❖ Stamp Format: 1, Stamp Format: 2, Stamp Format: 3, Stamp Format: 4
You can specify how each of registered User Stamps 1 to 4 is printed.
• Stamp Position
You can specify where to print the User Stamp.
The default setting is Top Right.
• Stamp Position
You can adjust the position of the User Stamp within the available range
as shown below.
Metric version:
• "Top Left"...T/B: 4-144mm, L/R: 4-144mm
• "Top Centre"...T/B: 4-144mm, L/R: 72-72mm
• "Top Right"...T/B: 4-144mm, L/R: 4-144mm
• "Centre Left"...T/B: 72-72mm, L/R: 4-144mm
• "Centre"...T/B: 72-72mm, L/R: 72-72mm
• "Centre Right"...T/B: 72-72mm, L/R: 4-144mm
• "Bottom Left"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Centre"...T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"...T/B: 4-144mm, L/R: 4-144mm
Stamp
3
99