Operator Recoverable Errors - Oce 9300 User Manual

Operator recoverable errors

The printer stops immediately when it detects an operator-recoverable error.
An error message displays on the panel. The user must take action to solve the
problem.
Message
ERROR FEED
TABLE
PAPER REMOVED
PAPER TOO
SHORT
PAPER JAM
FEED TABLE
OPEN
CUTTER ERROR
ROLL EMPTY
PAPER JAM ROLL
ROLLUNIT OPEN
REFILL TONER
OPEN ROLLUNIT
CHECK OUTPUT-
TRAY
Solving problems
Description
Print media in feed table or feed table not closed
Remove the paper and/or close the feed table
The paper has been removed from the feed table during a
print
The print material is too short
Remove the print media
Print media has jammed in the machine
Remove the jammed media
The feed table is not closed properly
Close the feed table
The print media is not properly cut
Remove the print media
The selected roll is empty
Remove the empty roll and place a new roll of print media
into the
roll unit
Print media has jammed in the roll unit
Remove the print media
The roll unit is open
Close the roll unit
Add toner
Open the roll unit to remove the print media
Print media has jammed in the active output tray
Remove the jammed print media and press Continue
93