Oce 9300 User Manual page 47

Defining the pen settings
Press 'Program' to enter the main menu.
1
Select the 'C
2
ONFIGURATION
Press 'next/select' to enter the 'C
3
Select the '
4 PEN MENU
Press 'next/select' to enter the '
1
For each pen setup, proceed as follows:
Select the '
2
PEN NUMBER
Press 'next/select' to enter the '
3
Select the required '
4
Press 'next/select' to confirm the selected pen number.
5
Press 'previous' to re-enter the pen menu.
6
From this menu:
Select the '
7
PEN WIDTH
Press 'next/select' to enter the '
8
Select the required pen width using the
9
Press 'next/select' to confirm the selected pen width.
10
Press 'previous' to re-enter the pen menu.
11
Select the '
12
PEN PATTERN
Press 'next/select' to enter the '
13
Select the appropriate pen pattern using the
14
Press 'next/select' to confirm the selected pen pattern.
15
After programming all pen settings:
Press 'Program' to exit the main menu.
16
Customizing defaults
' item using the
ONFIGURATION
' option using the
PEN MENU
' item using the
PEN NUMBER
' using the
PEN NUMBER
' item using the
PEN WIDTH
' item using the
PEN PATTERN
or button.
' menu.
or button.
'.
or button.
'menu.
or button
or button.
'menu.
or button.
or button.
'menu.
or button.
47