Table of Contents
Advertisement
Transformation
The Océ 9300 allows the user to change the position of the image on the print
in the following ways: Image rotation and scaling functions. This applies only
to vector languages and is possible only when the media saver is switched off.
Print rotation
This function allows you to set the degree of rotation applied to a print. Four
rotation values are possible: 0°, 90°, 180°, and 270°. The default is 0°. This
function applies only to vector languages.
Defining the print rotation
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required value using the
10
Press 'next/select' to confirm the setting.
11
Press 'Program' to exit the main menu.
12
Print scaling
The X-scale and Y-scale can be individually set to values ranging from 0.05 to
20.0. The default is 1.0. This function applies only to vector languages.
Defining print scaling
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Advanced menu functions
' item using the
ONFIGURATION
' item using the
PLOT MANAGER
' item using the
TRANSFORM
' item using the
ROTATION
' item using the
ONFIGURATION
' item using the
PLOT MANAGER
or
' menu.
ONFIGURATION
or
' menu.
PLOT MANAGER
or
button.
' menu.
TRANSFORM
or
button.
'menu.
ROTATION
or
button.
or
' menu.
ONFIGURATION
or
' menu.
PLOT MANAGER
button.
button.
button.
button.
83
Advertisement
Table of Contents
