Password - Oce 9300 User Manual

Password

Because the printer may be operated in your work environment by users with
differing skill levels, three menu access levels can be set for security reasons.
The display menu allows fully authorized users to access these different printer
menu levels, from the locked level to the full menu levels, by means of
passwords.
The short menu level allows access to the display, cancel plot, media settings
and plot menus, enabling users to set plot parameters, execute the printer test
and demo plot, set the number of copies and cancel plots in progress. The
password for the short menu is:
The full menu level allows access to the display, plot, configuration, cancel plot
and number of copies menus, as well as their sub-menus. The password for the
full menu is:
The locked level locks the entire printer. When this level is set, the printer acts
only as an output device, receiving commands from your workstation via
remote control. Although commands cannot be entered on the operating panel,
informative messages are still displayed. The password for the locked menu is:
'previous'
Setting the menu access level
Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select' to enter the '
3
Select the required menu level using the
4
Press 'next/select' to confirm.
5
Depending on the selected menu level, a password must be entered.
6
Press 'next/select' to confirm the password.
7
Press 'Program' to exit the main menu.
8
Advanced menu functions
'previous'
'previous'
' item using the
DISPLAY
'previous'
.
.
or button.
' menu
.
DISPLAY
or button.
.
87