Instructions For Safe Use - Oce 9300 User Manual

Instructions for safe use

Océ machines and materials have been developed and tested in accordance
with the strictest international safety standards. To ensure your safety while
working with these products, it is important that you observe the following
safety rules:
Do not remove any screws from fixed panels.
The machine is not user-serviceable except for the components and
maintenance materials mentioned in this manual.
Do not place any liquids on the machine.
Use maintenance materials or other materials for their intended purpose only.
Keep maintenance materials out of the reach of children.
Do not mix cleaning fluids or other materials.
To avoid risks, all modifications to Océ equipment must be performed only
by Océ service personnel. We recommend that you use attachment cables
specified by Océ.
The printer has been fitted with an ozone filter.
Do not bridge any mechanical or electrical circuit breakers.
Do not use an extension cord to connect the machine.
Locate the machine close to an electrical outlet that is easily accessible.
The switch in the fixed connection (if any) should be easily accessible.
This machine has not been designed for connection to an IT power system.
(An IT power system is a voltage network in which the neutral wire is
grounded).
Do not block the ventilation openings of the machine.
Make sure that the machine is placed on a level, horizontal surface, stable and
strong enough to support the weight of the machine. See the Océ 9300 safety
data sheet in this appendix for information about the weight of the machine.
Make sure that there is sufficient space around the machine. This facilitates
reloading materials as well as maintenance.
Do not place the machine in rooms which are subject to excessive vibration.
Do not place the machine in rooms which are too small or insufficiently
ventilated. See the Océ 9300 safety data sheet in this appendix for
information about space and ventilation requirements.
Always use materials recommended by Océ and developed for this Océ
machine. Materials not approved by Océ may result in machine failures.
Do not use the machine if it makes unusual sounds. Remove the plug from
the electrical outlet and contact Océ Customer Service.
110 Océ 9300 User Manual