Bits Combination; Serial Parity And Stop Bits - Oce 9300 User Manual

Bits combination

When transmitting data via the serial interface, 8 or 7 bits per byte are used.
The default is 8.
Defining the bits combination
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the '
10
Press 'next/select' to enter the '
11
Select the number of bits per byte using the
12
Press 'next/select' to confirm the selected number of bits.
13
Press 'Program' to leave the main menu.
14

Serial parity and stop bits

For correct data transfer, the parity and stop bits (framing) are required. You
can select the following combinations:
None, 1 stop No parity, 1 stop bit
None, 2 stopNo parity, 2 stop bits
Even, 1 stopEven parity, 1 stop bit
Even, 2 stopEven parity, 2 stop bits
Odd, 1 stopOdd parity, 1 stop bit
Odd, 2 stopOdd parity, 2 stop bits
Default is NONE, 1 STOP
Setting the parity and stop bits
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
18 Océ 9300 User Manual
' item using the
ONFIGURATION
' item using the
CONNECTIONS
' item using the
SERIAL
' item using the
TRANSMISSION
' item using the
BAUD RATE
' item using the
ONFIGURATION
' item using the
CONNECTIONS
or
' menu.
ONFIGURATION
or
' menu.
CONNECTIONS
or button.
' menu.
SERIAL
or
' menu.
TRANSMISSION
or button.
' menu.
BAUD RATE
or
or
' menu.
ONFIGURATION
or
button.
button.
button.
button.
button.
button.