Table of Contents
Advertisement
Centronics
Connection through the Centronics interface is direct and data transfer is fast.
You must set two parameters: the transmission type and the plot time-out.
Connecting Centronics
Turn off the printer and host.
1
Connect one end of the Centronics cable to the computer's Centronics parallel
2
port.
Connect the other end to the printer's Centronics parallel port (see figure 3).
3
[3] Centronics port
Turn the printer on.
4
Defining transmission speed
Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select
3
Select the 'C
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the required speed using the
8
Press 'next/select' to confirm the selected speed.
9
Press 'Program' to exit the main menu.
10
Installing the printer
menu using the
'
CONFIGURATION
to enter the '
'
' menu using the
ONNECTIONS
' item using the
CENTRONICS
or
menu.
'
CONFIGURATION
or
' menu.
CONNECTION
or
button.
' menu.
CENTRONICS
or
button.
button.
button.
15
Advertisement
Table of Contents
